Welcome to Huachuang Company's website,Huachuang---Since 1999,xpert in adhesive innovation

Huachuang-Adhesive/New Material Expert

You are here:HOME>Single Epoxy

Single Epoxy

H907-HF-RN弹性环氧粘接胶 Type-c连接器密封防水胶水 充电接口端口封装胶气密性好

华创新材2021-05-18 08:26:54Single Epoxy1123source:Epoxy resin adhesive | high-temperature adhesive | potting adhesive | thermal conductive adhesive | structural adhesive | UV adhesive | AB adhesive |glue |sealant|- Huachuang Materials

H907-HF-RN是单组份改性环氧树脂弹性密封胶,广泛应用于各类电子元器件、电工电器、机电五金、磁性元件、光电产品、汽配组件、连接器、端子等之粘接固定密封保护,对于金属、陶瓷、玻璃、纤维制品及硬质塑胶之间的封装粘接有优异的粘接强度;推荐用于连接器,端子,线材,Type-c手机充电接口连接器的密封保护防水;常温下粘度适中,易于生产作业;固化物具有较好的弹性、较低的内应力、良好的粘接强度、密着性、优良的电气特性以及卓越的防振动性能。

外观及物性:

外观               粘稠状体

 颜色              黑色

比重(25℃)1.25-1.35

粘度(25℃)15000-30000 CPS

保存期限       25度2个月,5度3个月

包装              30CC、1KG或5KG

固化条件:  115- 120度1.5-2小时或180度30-60分钟

type-c连接器2.jpg

固化物特性:

体积电阻       Ω-cm         5.0×1013     

表面电阻              Ω          2.5×1013  

断裂伸长率     %               >130   

绝缘破坏电压         kv/mm        16

接力强度       kg/cm2    15-25  

 引张强度              MPa         8.0

硬    度       SHORE D       45-55  

H907-hf-rn is a single component modified epoxy resin elastic sealant, which is widely used in the bonding and sealing protection of various electronic components, electrical and electrical equipment, electromechanical hardware, magnetic components, photoelectric products, auto parts components, connectors, terminals, etc. it has excellent bonding strength for the packaging and bonding between metal, ceramics, glass, fiber products and hard plastics; It is recommended to be used for sealing protection and waterproof of connector, terminal, wire rod and type-C mobile phone charging interface connector; The viscosity is moderate at room temperature, and it is easy to operate; The solidified material has good elasticity, low internal stress, good bonding strength, tightness, excellent electrical properties and excellent vibration resistance.

Post comments

Comment List(0comments , 1123views)
☹There are no comments yet, let's have a few words...